Professional Flooring Supply
Your Next Selections: |

Adhesive Solutions

|

Shop By Brand

Product Listing

Sort by
Products per page
 Item #ProductAvailability 
Dyna-Stix VCT is a solvent-free, water-based adhesive that dries translucent. Tiles may be laid into the adhesive for an extended period of time after drying. Aggressive tack permits installers to work off tiles. This low-odor adhesive can be used in occupied environments such as hospital, schools, nursing homes, hospitality and food preparation centers.30855587XL Brands Dyna Stix VCT High Moisture 95% RH 4 Gal
Login for more information
Stix 800 is an economical professional-grade multipurpose adhesive. It is ideal for light traffic carpet installations in offices, residential, and light commercial areas, and can also be used for mineral-fibrous-backed resilient sheet goods. Stix 800 is a solvent-free, water-based adhesive suggested for use in occupied buildings, as it is low in odor, contains no solvents and is environmentally safe with no hazardous ingredients.30856405XL Brands Stix 800 Professional Grade Multipurpose 1 Gal
Login for more information
Stix 800 is an economical professional-grade multipurpose adhesive. It is ideal for light traffic carpet installations in offices, residential, and light commercial areas, and can also be used for mineral-fibrous-backed resilient sheet goods. Stix 800 is a solvent-free, water-based adhesive suggested for use in occupied buildings, as it is low in odor, contains no solvents and is environmentally safe with no hazardous ingredients.30855684XL Brands Stix 800 Professional Grade Multipurpose 4 Gal
Login for more information
Premium solvent-free, water-based contact adhesive. Easily applied with brush or roller, the short open time produces a powerful bond, immediately upon contact. The non-flammable, low-VOC and low odor content makes it ideal or occupied buildings.88437Uzin WK 222 Non-Flammable Water-Based Contact Adhesive - 1.44 Gal
Login for more information
Excelsior WB-600 Wall Base Adhesive is an acrylic wet-set wall base adhesive that can be used over porous substrates in indoor applications. It is specifically formulated for permanent installations of rubber, TPR, and vinyl wall base products; it is a low odor, non-flammable, solvent-free, no slump, hard setting, permanent bonding and ready to use product.4EX600Roppe WB 600 Wall Base Adhesive 4 Gal
Login for more information
Powerhold 3000 Multi-Purpose Adhesive is a quick grabbing adhesive designed for installing carpet in a direct glue down or double glue down application and installing fibrous felt back sheet flooring. It is recommended for the installation of the following carpet backings: Action-Bac, Sponge-Rubber, Latex Unitary, High Density Foam, Latex Foam, and the majority of carpet backings found in the market place today. It is not recommended for vinyl-backed carpet, cushion backed vinyl, unitary backed carpet, outdoor applications or where excessive moisture or hydrostatic pressure is present.15016208Powerhold 3000 Premium Multipurpose 4 Gal Adhesive
Login for more information
Powerhold Glue SticksPHT-8825Powerhold Glue Sticks
Login for more information
Stix 4200 is a light-colored and solvent-free acrylic adhesive designed to bond most vinyl and rubber cove base on clean, dry interior walls. Stix 4200 has the powerful wet strength needed to hold cove base firmly to the wall until it dries. The fast-setting formula provides a durable impact-resistant bond. Stix 4200 is non-staining and compatible with most common manufactured brands of vinyl and rubber cove base.30856624XL 4300 Professional Grade Cove Base Adhesive Gallon
Login for more information
Taylor Shaw 1000 Superior Grade Carpet Adhesive 4 Gal1000-4-SITaylor Shaw 1000 Superior Grade Carpet Adhesive 4 Gal
Login for more information
Powerhold Plus Glue Sticks Extended Open Time 1 LbPHX-6561-1Powerhold Plus Glue Sticks Extended Open Time 1 Lb
Login for more information
XL Adhesives Interface Next Step Adhesive 4 GalA2300-4XL Adhesives Interface Next Step Adhesive 4 Gal
Login for more information
Stix 4200 is a light-colored and solvent-free acrylic adhesive designed to bond most vinyl and rubber cove base on clean, dry interior walls. Stix 4200 has the powerful wet strength needed to hold cove base firmly to the wall until it dries. The fast-setting formula provides a durable impact-resistant bond. Stix 4200 is non-staining and compatible with most common manufactured brands of vinyl and rubber cove base.30856411XL Brands 4200 Pro Grade Cove Base Adhesive 4 Gal
Login for more information
Use this easy to spread, economy grade, latex based adhesive for the interior, direct glue down installation of non-vinyl backed carpet. Provides ample open time, strong wet tack and a water-resistant bond.900-4Taylor Workhorse Carpet Adhesive 4 Gal
Login for more information
Traxx Hot Melt Glue Sticks PH 6560 17 PkPHX-6560-1Traxx Hot Melt Glue Sticks PH 6560 17 Pk
Login for more information
Stix 4300 is a light-colored and solvent-free acrylic adhesive designed to bond most vinyl and rubber cove base on clean, dry interior walls. Stix 4300 has the powerful wet strength needed to hold cove base firmly to the wall until it dries. The fast-setting formula provides a durable impact-resistant bond. Stix 4300 is non-staining and compatible with most common manufactured brands of vinyl and rubber cove base.30856537XL 4300 Professional Grade Cove Base Adhesive - 30oz
Login for more information
UZIN Siliconized Acrylic Caulk is a 1-part, smooth, unsanded, ready-to-use caulk suitable for interior corners and changes of plane up to ¼” (6 mm) in depth and width for most applications of tile & stone; and is color-matched to UZIN grout products. When cured, it is flexible and resistant to water, mold, mildew and cracking. It is effective as a flexible filler to prevent cracking in tile and joints due to substrate or climatic movement. It’s used for caulking around sinks, tubs, showers, bath fixtures, countertops, baseboards, windows, glass block, glass tile, door frames and many other surfaces and especially where tile meets dissimilar surfaces as listed above, and including vinyl, wood and laminate floorcoverings.10067Uzin CB 2 Project Cove Base Adhesive -30oz
Login for more information
UZIN KR 518 is an ultra-low-viscosity fast-setting resin to fill joints in cracked, spalled concrete and saw cuts prior to the installation of UZIN moisture vapor retarder products, self-leveling compounds or patches. It offers deep penetration properties into concrete, providing high compressive strength. A wide service temperature allows for use in difficult climatic situations. For interior and exterior use.88680UZIN KR 518 2 Component Joint Filler 20.2 OZ.
Login for more information
UZIN CB 2 is a quality wall base adhesive specifically designed to provide a superior bond for rubber, vinyl and carpet wall base over porous surfaces. The smooth, full-bodied consistency of UZIN CB 2 allows for easy trowel or cartridge application. Quick grab ensures the wall base holds firmly, keeping corners wrapped tight.10225Uzin CB 2 Project Cove Base Adhesive - Gal
Login for more information
UZIN CB 2 is a quality wall base adhesive specifically designed to provide a superior bond for rubber, vinyl and carpet wall base over porous surfaces. The smooth, full-bodied consistency of UZIN CB 2 allows for easy trowel or cartridge application. Quick grab ensures the wall base holds firmly, keeping corners wrapped tight.10200Uzin CB 2 Project Cove Base Adhesive 4 Gal
Login for more information
CoveStix 4400 is lighter and easier to handle and spread than conventional heavy cove base adhesives. A 4 gallon pail of CoveStix 4400 weighs approximately 28 lbs compared to other cove base adhesives that can weigh over 40lbs. CoveStix 4400 is recommended for installing difficult to bond vinyl (PVC), rubber and specialty cove base on clean, dry interior walls. CoveStix 4400 has the high grab and wet strength to keep corners tight and to hold cove base firmly to the wall until it dries.30855885XL Brands Covestix 4400 Cove Base Tube Adhesive 30 Oz
Login for more information
CoveStix 4400 is lighter and easier to handle and spread than conventional heavy cove base adhesives. A 4 gallon pail of CoveStix 4400 weighs approximately 28 lbs compared to other cove base adhesives that can weigh over 40lbs. CoveStix 4400 is recommended for installing difficult to bond vinyl (PVC), rubber and specialty cove base on clean, dry interior walls. CoveStix 4400 has the high grab and wet strength to keep corners tight and to hold cove base firmly to the wall until it dries.30855884XL Brands Covestix 4400 Cove Base Adhesive Gal
Login for more information
CoveStix 4400 is lighter and easier to handle and spread than conventional heavy cove base adhesives. A 4 gallon pail of CoveStix 4400 weighs approximately 28 lbs compared to other cove base adhesives that can weigh over 40lbs. CoveStix 4400 is recommended for installing difficult to bond vinyl (PVC), rubber and specialty cove base on clean, dry interior walls. CoveStix 4400 has the high grab and wet strength to keep corners tight and to hold cove base firmly to the wall until it dries.30855882XL Brands Covestix 4400 Cove Base Adhesive 4 Gal
Login for more information
M-250 is a brush/roller coat neoprene contact adhesive developed for multiple uses. As a general purpose industrial type adhesive, the M-250 can be used for non-structural bonding of wood, metal, rubber, leather, canvas, rigid polyurethane foam, paper honeycomb and many other porous and non-porous surfaces.15017002Parabond M-250 Brush Grade Contact Cement UN1133 *Hazmat* Qt
Login for more information
M-250 is a brush/roller coat neoprene contact adhesive developed for multiple uses. As a general purpose industrial type adhesive, the M-250 can be used for non-structural bonding of wood, metal, rubber, leather, canvas, rigid polyurethane foam, paper honeycomb and many other porous and non-porous surfaces.15017003Parabond M-250 Brush Grade Contact Cement UN1133 *Hazmat* Gal
Login for more information
M-250 is a brush/roller coat neoprene contact adhesive developed for multiple uses. As a general purpose industrial type adhesive, the M-250 can be used for non-structural bonding of wood, metal, rubber, leather, canvas, rigid polyurethane foam, paper honeycomb and many other porous and non-porous surfaces.15017004Parabond M-250 Brush Grade Contact Cement UN1133 *Hazmat* 5 Gal
Login for more information

Showing 26 - 50 of 211 Results

Resources

About Us

Policies

Contact Us
Store Locator

  • Connect With Us:

FSC Approved

Copyright © 2023 Professional Flooring Supply.  All rights reserved.