Tramex Concrete Moister Encounter X5 Meter Only

Data Sheet
User Guide
Quick Start Guide - 4 modes of measurement: Non-destructive moisture measurement, ambient hygrometer, and optional external in-situ hygrometer and wood pin probe.
- 5 Non-Destructive test (NDT) Scales: Concrete %MC, CM Concrete (Carbide Method equivalent for concrete), CM Anhydrite/Gypsum (Carbide Method equivalent), Gypsum Reference 0-12 and a Reference scale.
- Instant and precise readings to a depth of approximately 20mm (3⁄4") into the concrete slab, for reproducible and reliable results.
- The built-in Hygrometer probe provides Ambient Relative Humidity (%RH) readings, temperature, dew-point temperature and Humidity Ratio.
- Pin-probe mode for 5% to 30% Moisture Content measurement in Wood; 7 -100 comparative (WME), using Pin-type probe attachments. (optional)
- Attaches to a reusable relative humidity Hygro-i2 ® probe for in situ and hood testing of concrete per BS 8201, 8203, 5325 and ASTM F2170. (optional)
- Airspace conditions of Relative Humidity, Temperature, Dew-point and Humidity Ratio (using optional RH probes)
- Moisture readings and scale are displayed on a large, clear easy-to-read clear digital display: 2.3" x 1.4" (58mm x 35mm).
- Front lit display allows the CMEX5 concrete moisture meter's display to be easily read in poor light conditions.
- Bluetooth connection to accompanying IOS & Android App allowing for continual development and integration of apps and reporting.
- Hold Function which enables the user to “freeze” the reading, useful when taking readings where the meter face may not be visible.
- Spring-loaded contact pins compensate for uneven concrete and boost signal penetration.
- Rugged ergonomically designed enclosure.

4 measurement modes:

1.Non-destructive test (NDT) mode: The Tramex Concrete Moisture Encounter X5 is a non-destructive digital multi moisture meter for concrete floors and slabs providing instant and precise quantitative measurement of moisture content using Gravimetric testing as a baseline. The CMEX5 also provides Carbide Method equivalent readings for concrete and other cementitious substrates as well as comparative readings as per ASTM F2659.

2.Hygrometer mode: The built-in Ambient Relative Humidity Sensor measures Ambient Relative Humidity, Temperature, Dew Point, and Humidity Ratio (or Mixing Ratio) of the environment.

3.Equilibrium Relative Humidity mode (optional plug-in probe): Using the optional plug-in Hygro-i2 RH probes, the Concrete Moisture Encounter X5 will measure Equilibrium Relative Humidity, Temperature, Dew Point and Humidity Ratio in structural materials. A structural material such as a concrete slab can be tested using the in-situ method or RH Hood methods (International Standards: ASTM F2170 & BS 8201, 8203, 5325). Relative Humidity Probes can also be used for ambient RH measurements within air spaces.

4.PIN Meter mode (optional plug-in probe): The Concrete Moisture Encounter X5 becomes a resistance type meter and measures the percentage moisture content (%MC) of wood when used with the optional plug-in PIN meter. International wood standards or pre-programmed wood species can be selected. PIN meter mode can also be used for Drywall and WME (Wood Moisture Equivalent) readings for other materials. Size: 7.1" x 3.4" x 1.6" (180mm x 85mm x 40mm)
Weight: 12.59oz (357g)
Construction: ABS Body
Power: 2 x AALR6 ALKALINE (included)
Display: Digital
Depth of penetration in concrete: approx. 3/4" (20mm)

Measuring range
Moisture content for Concrete: 0 → 6.9 %
Comparative for Gypsum floor screed: 0 → 12
CM Equiv Anhydrite/Concrete: 0→2.7 / 0→4.3
Reference scale: 0 → 100
Relative Humidity: 0 → 99%
(with optional Hygro-i2 ® probe): Humidity accuracy: 0% → 99%RH +/- 2% @ 25°C / 77°F
Moisture content for wood (with optional wood pin probes):5 → 30 %