Your Next Selections: |

Shop By Brand

Product Listing

Sort by
Products per page
 Item #ProductAvailability 
Powerhold 500 is a brush/roller coat neoprene contact adhesive developed especially for bonding decorative plastic laminate to particle board in the manufacturing of counter tops. As a general purpose industrial type adhesive, PH 500 can be used for non-structural bonding of wood, metal, rubber, leather, canvas, rigid polyurethane foam, paper honeycomb and many other porous and non-porous surfaces.15018567Powerhold 500 Standard Contact Cement- Adhesive 1 Qt
Login for more information
Powerhold 500 is a brush/roller coat neoprene contact adhesive developed especially for bonding decorative plastic laminate to particle board in the manufacturing of counter tops. As a general purpose industrial type adhesive, PH 500 can be used for non-structural bonding of wood, metal, rubber, leather, canvas, rigid polyurethane foam, paper honeycomb and many other porous and non-porous surfaces.15016150Powerhold 500 Standard Contact Cement Adhesive 1 Gal
Login for more information
Powerhold Glue SticksPHT-8825Powerhold Glue Sticks
Login for more information
Powerhold Plus Glue Sticks Extended Open Time 1 LbPHX-6561-1Powerhold Plus Glue Sticks Extended Open Time 1 Lb
Login for more information
Traxx Hot Melt Glue Sticks PH 6560 17 PkPHX-6560-1Traxx Hot Melt Glue Sticks PH 6560 17 Pk
Login for more information
UZIN KR 518 is an ultra-low-viscosity fast-setting resin to fill joints in cracked, spalled concrete and saw cuts prior to the installation of UZIN moisture vapor retarder products, self-leveling compounds or patches. It offers deep penetration properties into concrete, providing high compressive strength. A wide service temperature allows for use in difficult climatic situations. For interior and exterior use.88680UZIN KR 518 2 Component Joint Filler 20.2 OZ.
Login for more information
This contact cement has a flash point over 20 degrees F (-6.67 degrees C) (T.O.C.) to comply with C.P.S.C. regulations for over-the-counter products (when in 1-gallon or smaller sizes). FLAMMABLE. FOR PROFESSIONAL USE ONLY1N-04Taylor *Hazmat* Contact Cement UN1133 Flammable Liquid Qt
Login for more information
This contact cement has a flash point over 20 degrees F (T.O.C.) to comply with C.P.S.C. regulations for over-the-counter products (when in 1-gallon or smaller sizes). FLAMMABLE. FOR PROFESSIONAL USE ONLY1N-4Taylor *Hazmat* TD Contact Cement UN1133 Flammable Liquid 4 Gal
Login for more information
This contact cement has a flash point over 20 degrees F (T.O.C.) to comply with C.P.S.C. regulations for over-the-counter products (when in 1-gallon or smaller sizes). FLAMMABLE. FOR PROFESSIONAL USE ONLY1N-1Taylor *Hazmat* TD Contact Cement UN1133 Flammable Liquid Gal
Login for more information
Specially formulated for bonding carpet tack strips to almost any flooring surface. High strength permits immediate power stretching. FLAMMABLE. FOR PROFESSIONAL USE ONLY700-1Taylor 700 Tackless Cement - Gallon
Login for more information
Specially formulated for bonding carpet tack strips to almost any flooring surface. High strength permits immediate power stretching. FLAMMABLE. FOR PROFESSIONAL USE ONLY700-04Taylor 700 Tackless Cement Qt
Login for more information
These glue sticks are 10 inches long and have the standard 7/16" diameter for use in glue guns that that take this standard size stick (including Crain No. 203, No. 204 and No. 207 Glue Guns). They come in a resealable heavy-duty clear plastic bag for storage in the tool box. Each bag includes one pound or 19 sticks. Melted glue temperatures from the glue gun are very hot, up to 400°F. Users should avoid contact with hot melted glue and keep out of the reach of children. Net weight: 1 lb.201Crain 201 10" Glue Sticks (19 pack)
Login for more information
These glue sticks are 4 inches long and have the standard 7/16" diameter for use in glue guns that take this standard size stick (including Crain No. 203, No. 204 and No. 207 Glue Guns). They come in a resealable heavy-duty clear plastic bag for storage in the tool box. Melted glue temperatures from the glue gun are very hot, up to 400°F. Users should avoid contact with hot melted glue and keep out of the reach of children.202Crain 202 4" Glue Sticks (24)
Login for more information
Crain 208 Acrylic Glue Sticks (19 pack)208Crain 208 Acrylic Glue Sticks (19 pack)
Login for more information
These 10" glue sticks provide more open time to position materials (approximately 3 minutes). They are helpful to position starter boards for installation of hardwood flooring, or for gluing long trim pieces. Includes 20 sticks and comes in a self-closing bag for storage. Sticks are standard 7/16" diameter for use in a wide variety of glue guns. For best results, apply using a high temperature glue gun operating at 350 degrees F - 390 dregrees F, such as the Crain No. 207. Apply in small dollops rather than thin lines to preserve heat. Melted glue temperatures are very hot, up to 400 degrees F.209Crain 209 Extra Open Time 10" Glue Sticks (20 pack)
Login for more information
DAP WELDWOOD Landau HHR Contact Cement is a sprayable contact adhesive especially developed to meet the requirements of the automobile refurbishment after-market business. Landau adhesive has excellent application properties and forms a high strength, high heat resistant bond that is resistant to water.7079800237 00237 5GADAP Weldwood Landau Top & Trim High Heat Resistant Contact RED 5 GAL
Login for more information
Cap has longer lip than competing products. Allows installer to see adhesive application to carpet's edge. Used for Residential and commercial installation stretched over cushion. Also to be used with double stick using hot seam tape.ORX-8850-08Orcon Fast Loc Sealer W/Universal Cap
Login for more information
New lower-melting point adhesive for better Peak-Buster seam welding action. Adhesive goes on clear and dries clear. Contains a UV tracer for proof-positive compliance of CRI's Edge Securing Standards.ORT-8825Orcon Glue Sticks Clear
Login for more information
Quick-drying dispersion wood adhesive for gluing the tongue and groove on prefinished wood and laminate flooring. Also suitable for use as a universal wood adhesive on many wood species and wood-based materials.70941Pallmann P13 Tongue & Groove Adhesive 29 oz
Login for more information
M-250 is a brush/roller coat neoprene contact adhesive developed for multiple uses. As a general purpose industrial type adhesive, the M-250 can be used for non-structural bonding of wood, metal, rubber, leather, canvas, rigid polyurethane foam, paper honeycomb and many other porous and non-porous surfaces.15017004Parabond M-250 Brush Grade Contact Cement UN1133 *Hazmat* 5 Gal
Login for more information
M-250 is a brush/roller coat neoprene contact adhesive developed for multiple uses. As a general purpose industrial type adhesive, the M-250 can be used for non-structural bonding of wood, metal, rubber, leather, canvas, rigid polyurethane foam, paper honeycomb and many other porous and non-porous surfaces.15017003Parabond M-250 Brush Grade Contact Cement UN1133 *Hazmat* Gal
Login for more information
M-250 is a brush/roller coat neoprene contact adhesive developed for multiple uses. As a general purpose industrial type adhesive, the M-250 can be used for non-structural bonding of wood, metal, rubber, leather, canvas, rigid polyurethane foam, paper honeycomb and many other porous and non-porous surfaces.15017002Parabond M-250 Brush Grade Contact Cement UN1133 *Hazmat* Qt
Login for more information
Seam Master Kool Glide Kool Stics 10 Pack Sinch SystemKGX-6560-1Seam Master Kool Glide Kool Stics 10 Pack Sinch System
Login for more information

Showing 1 - 23 of 23 Results

  • Connect With Us:

FSC Approved

Copyright © 2023 Professional Flooring Supply.  All rights reserved.