Professional Flooring Supply - Powerhold PH-1 Powerbond Thinset Mortar 50 lb. Gray,Powerhold PH-1 Powerbond Thinset Mortar 50 lb. Gray

Professional Flooring Supply

Professional Flooring Supply

Powerhold PH-1 Powerbond Thinset Mortar is for use with porcelain and ceramic tiles. Mixed with water, it exceeds ANSI A118.4 and ANSI A118.11 specifications. Use interior and exterior.

Description:

Powerhold PH-1 Powerbond Thinset Mortar is for use with porcelain and ceramic tiles. Mixed with water, it exceeds ANSI A118.4 and ANSI A118.11 specifications. Use interior and exterior.

Item #:
15030108

UOM:Each
Availability:Login for Availability

Quantity:

Ask Question Tell a Friend

Product Information

Packaging:

50 lbs per Each
56 Each per Pallet

Coverage:

Coverage will vary with condition of substrate. Required trowel size will vary with the tile size, type and substrate uniformity. Select the trowel size that will ensure 100% coverage. Figures below are presented only as guidelines.

1/4" x 1/4" x 1/4" (6 x 6 x 6 mm) square notch trowel; 85-95 sq. ft. (7.9-8.8 m²)
1/4" x 3/8" x 1/4" (6 x 9 x 6 mm) square notch trowel; 58-68 sq. ft. (5.4-6.3 m²)

Documentation:

No documents available.

Packaging:

50 lbs per Each
56 Each per Pallet

Coverage:

Coverage will vary with condition of substrate. Required trowel size will vary with the tile size, type and substrate uniformity. Select the trowel size that will ensure 100% coverage. Figures below are presented only as guidelines.

1/4" x 1/4" x 1/4" (6 x 6 x 6 mm) square notch trowel; 85-95 sq. ft. (7.9-8.8 m²)
1/4" x 3/8" x 1/4" (6 x 9 x 6 mm) square notch trowel; 58-68 sq. ft. (5.4-6.3 m²)

Client Reviews:

Share your thoughts with other customers Write Your Own Review

There are no product reviews yet.

Clients who bought this item also bought:

US Gypsum 1/2" Durock Underlayment Cement Board 3' X 5' Sheet

UZIN NC 157 is a very low emission, rapid setting, cement leveling compound, formulated for use up to 2" (50 mm) maximum depth. It works well for producing level or fl at surfaces with high absorbency for standard preparation and cost effective installation applications in areas with normal wear demands. For interior use only

Uzin NC 157 Self Leveling Compound Cementitious 50Lb

A rapid setting, quick drying smoothing compound for repair, filling and patching. It can be used on a variety of substrates to repair subfloor imperfections prior to the installation of most flooring products. Portland cement-based.

Uzin NC 886 Skim And Repair Compound Fast Setting 10Lb

Bostik Mud-In-A-Bag is a pre-blended floor mud mixture of 4 parts sand to 1 part Portland cement for use in mortar beds from 3/4" to 4" thick.

Bostik Mud In A Bag - 50 Lbs - Gray

Clients who viewed this item also viewed:

Powerhold PH-1 Powerbond Thinset Mortar is for use with porcelain and ceramic tiles. Mixed with water, it exceeds ANSI A118.4 and ANSI A118.11 specifications. Use interior and exterior.

Powerhold PH-1 Powerbond Thinset Mortar 50 lb. White

Powerhold PH-2 Powerbond LHT Mortar is a one-component, Portland cement based tile mortar designed to set large format ceramic and stone tile firmly in place, without lippage or shrinkage, for interior and exterior floor applications where the embedded thickness is between 3/32"-1/2" (2.4 mm-12 mm). PH-2 Powerbond LHT Mortar may be used for the installation of procelain tile, ceramic tile, quarry tile, non-moisture sensitive natural stone*, cement tile, pavers and high bottom lugged tile. * All natural stone should be tested to be sure discoloration does not occur.

Powerhold PH-2 Powerbond LHT Mortar 50 lb. Gray

Powerhold PH-2 Powerbond LHT Mortar is a one-component, Portland cement based tile mortar designed to set large format ceramic and stone tile firmly in place, without lippage or shrinkage, for interior and exterior floor applications where the embedded thickness is between 3/32"-1/2" (2.4 mm-12 mm). PH-2 Powerbond LHT Mortar may be used for the installation of procelain tile, ceramic tile, quarry tile, non-moisture sensitive natural stone*, cement tile, pavers and high bottom lugged tile. * All natural stone should be tested to be sure discoloration does not occur.

Powerhold PH-2 Powerbond LHT Mortar 50 lb. White

Powerhold Type 1 Mastic can be used for installing ceramic, porcelain, natural stone, quarry and mosaic tile on interior floors and walls. Recommended for floor applications with tile up to 8" x 8" and wall applications with tile up to 12" x 12". It meets ANSI A136.1 Type I and II specifications, spreads easily, sets quickly, and is easy to clean up.

Powerhold Type 1 Mastic 3.5 Gallon

Connect With Us:

Copyright © 2023 Professional Flooring Supply. All rights reserved.

Powered by K8 Web Builder